Upload Images Canon 70d to Chromebook Without a Reader

Getting started

The procedure for using the Wi-Fi role to send images from a camera to a computer is explained in the following 4 steps. Proceed in gild from Step ane.

Step i: Preparing necessary items

Step two: Performing bones camera settings

Step iii: Connecting the photographic camera to the computer

Step iv: Sending images to the computer

Pace one: Preparing necessary items

1. Cheque the calculator`s requirements.

The camera can connect to the post-obit computers via wireless LAN.

	Windows	Macintosh
Bone	Windows eight Windows seven^1 Windows Vista^2 Windows XP Professional / Habitation Edition^*3	Mac OS X x.6.8, ten.7, 10.8
Calculator	PC with one of the above Os preinstalled and a USB port as a standard characteristic (Upgraded machines non supported) * .Net Framework iii.0 is required *4	Macintosh with one of the above OS installed and a USB port as a standard feature
CPU	Pentium 1.3GHz or higher	Intel processor
RAM	Minimum 1GB *5	Minimum 1GB
Interface	Hi-Speed USB	Hullo-Speed USB
Display	Screen resolution: 1024 768 or more than Color quality: Medium (16 bit) or more than	1,024 x 768 resolution or higher Colors: Thousands or more

*1 Compatible with 32-scrap or 64-scrap systems for all versions except Started Edition.
*2 Compatible with 32-bit/64-bit systems for Service Pack 1 and Service Pack 2 except Started Edition.
*3 Compatible with Service Pack 3.
*4 .NET Framework is Microsoft software. It is installed together with European union.
*5 For Windows 7 64-chip systems, minimum of ii GB.

2. Confirm that an access point base unit (Wi-Fi router, etc.) is continued to the reckoner.

Annotation

A router is a device that creates a network (LAN) structure for connecting multiple computers. A router that contains an wireless function is called a wireless (LAN) router.

This folio volition refer to all wireless routers and base of operations stations as "access points".

When unsure of your computer setup, refer to the user transmission provided with the computer.

3. Brand sure that the included EOS Utility software is installed on your computer.

Important

Settings may not be possible with older versions of the software. Please install the software from the CD-ROM included with the camera.

Step 2: Performing basic camera settings

The following settings must be performed earlier the cameras Wi-Fi fuction is used.

1. Fix the cameras power switch to <ON>.

two. Press the <Menu> button to brandish the carte screen.

iii. Press the <

> button to select [Wi-Fi] under the [
] tab, so printing <
>.

four. Select [Enable], then printing <
>.

[Wi-Fi role] tin can at present be selected.

REFERENCE

Set [Car power off] nether the [
] tab to [Disable].

If the cameras auto power off is activated during the wireless LAN connection, the wireless LAN function will turn off. Wireless LAN connection is restored when the camera wakes up from motorcar power off.

5. Select [Wi-Fi role] under the [
] tab, and so press <
>.

REFERENCE

When setting up Wi-Fi for the first time, the camera nickname registration screen will be displayed.

When the camera is connected to some other device via a wireless LAN, the nickname will be displayed on the device. Be sure to set a nickname for your camera.

Select [OK] and and then enter a nickname (up to 16 letters and numbers).

Printing the <MENU> button when finished.

Select [OK] on the confirmation screen, and then press <
>.

The nickname is registered, and the [Wi-Fi function] screen will appear.

Notation

Virtual Keyboard Operation

Switching to other input areas

To switch between top and bottom input areas, press the <Q> button.

Moving the cursor

To move the cursor, press the <
> key in the height area.

Entering text

In the bottom input area, press the <
> or <
> fundamental to select characters and press <
> to enter them. You tin can bank check how many characters you have entered, and how many more than can be entered, by referring to [*/*] on the upper right of the screen.

Deleting text

Press the <
> button to erase one character.

Finishing text entry

Press the <MENU> button to confirm what you accept entered and exit. If a confirmation screen is displayed, select [OK] to exit.

Canceling text entry

Press the <INFO> button to cancel text entry and leave. If a confirmation screen is displayed, select [OK] to go out.

6. The [Wi-Fi part] screen will be displayed.

This concludes the basic photographic camera settings.

Step iii: Connecting the camera to the calculator

1. Select [
], then press <
>.

2. Select the Wireless setting method, and connect to the access betoken using one of the following methods.

For access points that support WPS:

3A Easy Connectedness via WPS (PBC Mode)

3B Easy Connection via WPS (PIN Mode)

For access points that practice not support WPS:

3C Transmission Connection by Searching Networks

NOTE

WPS (Wi-Fi Protected Setup) is a structure for simplifying settings when connecting one wireless LAN device to some other.

- In pushbutton connection mode (PBC mode), the photographic camera and the access point tin can be connected only by pressing the WPS push on the admission bespeak.

-In Pivot code connectedness manner (PIN mode), an 8-digit identification number specified on the camera is set at the access point to constitute a connexion.

Refer to the user guide provided with your admission indicate to check if it supports WPS.

3A Piece of cake Connection via WPS (PBC Mode)

NOTE

Check the position of the WPS push button on the admission point in advance.

3A-1. Press the <
> key to select [WPS (PBC mode)], so press <
>.

Select [OK] and press <

> to become to the next screen.

3A-2. Press the access points WPS button.

NOTE

For details most where the WPS button is located and how long to press information technology, refer to the access points instruction manual.

3A-3. Select [OK] and press <
> to establish a connection with the access indicate.

When a connection with the access point is established, the [IP address set.] screen is displayed.

3A-4. Press the <
> primal to select the automatic IP address setting method, so press <
>.

Select [OK] and press <

> to go to the next screen.

If you take completed the settings up to this point, proceed to Step 4. .

3B: Piece of cake Connection via WPS (PIN Mode)

IMPORTANT

If stealth functions of the admission point are enabled, connection may be disabled. Deactivate stealth functions.

3B-i. Press the <
> primal to select [WPS (Pivot way)], and then printing <
>.

Select [OK] and press <

> to go to the next screen.

3B-2. At the access point, specify the 8-digit Pin code displayed on the cameras LCD monitor.

NOTE

For instructions on setting PIN codes at the admission signal, refer to the access points instruction transmission.

Later the Pin code is specified, select [OK] and press <

3B-3. Select [OK] and press <
> to found a connection with the admission bespeak.

NOTE

It may take approx. ane infinitesimal to plant a connectedness.

When a connexion with the access betoken is established, the [IP address gear up.] screen is displayed.

3B-4. Press the <
> key to select [Motorcar setting], then printing <
>.

Select [OK] and press <

> to get to the side by side screen.

If you lot have completed the settings upwards to this point, please proceed to Step 4.

3C: Manual Connectedness by Searching Networks

3C-1. The access indicate`south SSID, security method, and encryption key are all necessary for connection. Refer to the user guide included with your access point to look upwards information on SSID, Security method/encryption method, and security keys.

Annotation

SSID-Numbers and letters used to identify a specific existing access point. This is also called the "admission point name" or "network name".

Security method/encryption method is the method for encrypting data during wireless manual.

Encryption key (network primal) is the cardinal used when encrypting data during wireless transmission.

3C-2. Press the <
> key to select [Find network], so press <
>.

Select [OK] and press <

> to become to the side by side screen.

3C-3. Printing <
> to enable the pick of an admission point, select the desired access point, then printing <
> once more.

Select [OK] and press <

> to go to the next screen.

Indicates whether the device is in infrastructure or advertizement hoc mode.

An icon is displayed if the admission point is encrypted.

Beginning 9 characters of the SSID.

Aqueduct used

NOTE

REFERENCE

This camera supports the post-obit options for [Authentication] and [Encryption settings]. Therefore, the encryption used by the access point should be one of the following.

[Hallmark]: Open up system, Shared central, WPA-PSK, or WPA2-PSK

[Encryption settings]: WEP, TKIP, or AES

3C-four. Press the <
> central to select the format and the number of characters used for the fundamental, and so press <
>.

Select [OK] and printing <

> to go to the side by side screen.

REFERENCE

If WEP encryption is used by the admission betoken, the [Central index] screen is displayed.

Select the primal index number specified for the access point, then press <
>.

Select [OK] and press <
> to become to the screen shown in step 3C-iv.

3C-5. Enter the encryption fundamental using the virtual keyboard.

After a connection to the access signal has been established , the [IP address set.] screen will be displayed.

3C-6. Press the <
> primal to select [Auto setting], then press <
>.

Select [OK] and press <

> to go to the adjacent screen.

REFERENCE

[Car setting]

Configures the settings available in [Manual setting] automatically. However, this choice can simply be used in environments using DHCP servers, or access points or routers with DHCP server functionality, such that IP addresses and related settings are assigned and configured automatically. If an error is displayed fifty-fifty though the IP address and related settings is prepare to be automatically assigned and configured, select [Manual setting].

[Manual setting]

When you lot take finished entering data, printing the <Bill of fare> push. A confirmation screen is not displayed.

If yous have completed the setting up to this point, go along to Step 4. .

4. 4. Employ the provided Pairing Software contained in the bundled software to establish a connexion between the camera and a calculator.
Press the <
> key to select [OK], then press <
>.

IMPORTANT

[Pairing Software] is installed automatically during "like shooting fish in a barrel installation" of the software provided with the camera. If it is not installed, install information technology on the computer to exist connected to the camera in accelerate.

Windows 8/7/Vista Users:

When operating the camera remotely using EOS Utility, perform the operations as follows before starting the [Pairing software]. If these operations are not performed, the [Pairing Software] may not outset.

Open the [C Bulldoze] > [Programme Files] > [Canon] > [EOS Utility] > [WFTPairing] folder (in this lodge), and and so double-click the [WFT FirewallSettings] icon. (The folder names above are examples. The location of files differs according to the surround.)

5. The following message is displayed. "******" represents the terminal six digits of the MAC address of the camera to be connected.

six. Start the pairing software.

Normally, it is installed in the same location as EOS Utility.

seven. Later on the pairing software starts upward, an icon is displayed on the job bar. When the camera is detected, a message is displayed.

8. Double-click the pairing software icon.

9. Detected cameras are listed. Click [Connect].

NOTE

Cameras that have already been continued are not included in the list.

If multiple cameras are displayed, identify the photographic camera to connect to past its MAC address displayed on the cameras LCD monitor.

10. When the camera detects the estimator on which you lot clicked [Connect] in footstep nine, the screen below is displayed.

Press the <
> central to select [OK], then press <
>.

11. Select [OK] and press <
> to relieve the settings.

REFERENCE

To change the proper noun of the settings, select [Settings proper name] and press <
>.

12. Later the connection has been established, the [
Connection] screen is displayed.

Note

There is no demand to complete pairing once more if y'all will go along using a particular camera and reckoner together afterward pairing without changing the settings.

To reconnect to the same computer, only turn on the camera and start the pairing software. The connectedness betwixt the camera and computer volition be established automatically.

This completes the procedure for connecting the camera with a figurer.

Footstep 4: Sending images to the computer

one. EOS Utility will first upwards.

If EOS Utility does not offset up automatically, Click the [Beginning] push button > [All Programs] > [Canon Utilities] > [EOS Utility] > [EOS Utility].

NOTE

For Mac OSX, click the [EOS Utility] icon on the Dock.

If the AutoPlay screen is displayed, click [Downloads images from EOS photographic camera].

2. The post-obit screen volition be displayed. Click
[Starts to download images], or
[Lets you select and download images].

*The master window displayed differs depending on the continued camera.

Note

The downloaded images are sorted past date into folders and saved in the [My Pictures] folder past default.

To modify the save destination, click [Preferences] and use the displayed dialogue box to choose a dissimilar destination.

3. If you selected [Lets you select and download images] in stride 3, a viewer window will announced and the images in the retention bill of fare will be displayed.

Select the desired images from the list past appending them with a checkmark, and then click [Download]. (Iv images accept been selected in the example below.)

NOTE

4. The [Download epitome] dialog box appears. To change the relieve destination click [Destination Folder...] and set up a new save destination in the dialog box displayed.

Click [OK].

v. The images will exist downloaded to the estimator.

6. When all images have been downloaded, DPP starts upwards automatically and the downloaded images are displayed in DPPs main window.

NOTE

To apply Digital Photo Professional or ImageBrowser EX for paradigm editing or other operations, refer to the PDF pedagogy manuals on the CD-ROM included with the camera.

This concludes the procedure for downloading images from the camera to a computer.

briggsfeaver.blogspot.com

Source: https://support.usa.canon.com/kb/index?page=content&id=ART141700